PoolMoss® for fountains brings the power of Sphagnum moss to the residential fountains. In addition to providing a new level of enjoyment for home users, it also reduces the time, cost, and effort associated with maintenance and service issues. Sized according to a fountain’s water volume, the amount of PoolMoss® is easily determined and applied. The system starts with the easily installed CC-F contact chamber, and PoolMoss®, which is easily changed on a monthly basis.
Open black contact chamber.
Insert PoolMoss® for fountains Starter dose into contact chamber (Option – insert a few rocks into dispenser to weigh down to bottom)
Snap contact chamber closed
Insert contact chamber into fountain in an area with substantial water flow – ideally underneath a waterfall
Change moss every 30 days. After first month, use PoolMoss® for fountains Maintenance dose.
When changing PoolMoss® for fountains: remove old moss from contact chamber and replace with new moss. Insert contact chamber back into fountain.
If winterizing your fountain, simply remove the contact chamber, dispose or compost moss contents, and clean and store contact chamber.
If treating the fountain with algaecide or shock or chlorine levels above 5 ppm, remove contact chamber from water before treatment and re-install after algaecide dissipates or sanitizer levels return to below 5 ppm.
Do not change water in the fountain unless water quality requires. PoolMoss® conditions water over time, and if the water is changed, you are removing much of what has been put into the water.
When water is changed, change the PoolMoss® as well for best results.
Storage and Handling
Keep PoolMoss® dry until use.
PoolMoss® for fountains Starter and Maintenance doses are good for fountains up to 10,000 gallons.